Physical state: Liquid HEALTH: 1*
Color: transparent FLAMMABILITY: 2
Odor: light PHYSICAL HAZARD: 1
Personal Protection: See Section 8
WARNING: HARMFUL IF SWALLOWED, ABSORBED THROUGH SKIN OR INHALED.DO NOT SPRAY. DO NOT HEAT.MAY CAUSE ALLERGIC SKIN REACTION.CAUSES EYE, SKIN AND RESPIRATORY TRACT IRRITATION
Relevant routes of exposure: Skin, Inhalation, Eyes
Potential Health Effects
Skin contact: Contact skin will cause irritation.
Eye contact: Contact with eyes will cause irritation.
First aid measures
Inhalation: Remove to fresh air. If symptoms develop and persist, get medical attention.
Skin contact: Immediately flush skin with plenty of water (using soap, if available). Remove contaminated clothing
and shoes. Wash clothing before reuse. Get immediate medical attention if symptoms occur.
Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. Get immediate medical attention.
Ingestion: Do not induce vomiting. Keep individual calm. Get medical attention immediately
Autoignition temperature: Not available
Flammable/Explosive limits-lower %: Not available
Flammable/Explosive limits-upper %: Not available
Extinguishing media: Foam, dry chemical or carbon dioxide.
Special fire fighting procedures: Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Unusual fire or explosion hazards: Uncontrolled polymerization may occur at high temperatures resulting in explosions or rupture of storage containers.
Hazardous combustion products: Oxides of carbon. Oxides of nitrogen. Irritating organic vapors. Toxic fumes.
Accidental release measures
Environmental precautions: Remove sources of ignition. Prevent product from entering drains or open waters.
Clean-up methods: Refer to Section 8 “Exposure Controls / Personal Protection” prior to clean up. Soak up with inert absorbent. Store in a partly filled, closed container until disposal.
Handling and storage
Handling: Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. DO NOT heat or spray. Use only with adequate ventilation. Refer to Section 8. Use only in area provided with appropriate exhaust ventilation.
Storage: For safe storage, store at or below 26°C (80°F). Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Incompatible products: Refer to Section 10.
Exposure controls/personal protection
Engineering controls: Local exhaust ventilation is recommended when general ventilation is not sufficient to control airborne contamination below occupational exposure limits.
Respiratory protection: Use COSHA approved respirator if there is potential to exceed exposure limit(s). If this material is handled at elevated temperatures or under mist forming conditions, without engineering controls, a COSHA approved respirator must be used.
Skin protection: Use impermeable gloves and protective clothing as necessary to prevent skin contact. Neoprene gloves.
Eye/face protection: Safety goggles or safety glasses with side shields. In a splash hazard environment, chemical goggles should be used in combination with a full face shield.
Physical and chemical properties
Physical state: Liquid Color: transparent
Odor: light Vapor pressure: Not available
pH: Not applicable Boiling point/range: Greater than 93°C (200°F)
Melting point/range: Not available Specific gravity: 1.10
Vapor density: Not available Evaporation rate: Not available
Solubility in water: Slight Partition coefficient (n-octanol/water): Not available
VOC content: Total volatiles 0.80 %
10.Stability and reactivity
Stability: Stable under normal conditions of storage and use.
Hazardous polymerization: May occur.
Hazardous decomposition products: Oxides of carbon. Oxides of nitrogen. Dimethylamine. Irritating organic vapors.
Incompatability: Strong acids. Strong oxidizing agents. Bases.
Conditions to avoid: Heat, flames, sparks and other sources of ignition. Do not heat above 26°C(80°C).