Flexi Gel Tips Adhesive - 30ml

This flexible, new generation adhesive for (gel) tips, is not a traditional messy glue, it's a clear putty that hardens under a normal UV/LED lamp OR our Pro Flash Cure lamp.
It has a strong adhesive effect that makes tip positioning and fixing easy. It doesn’t move or slip, and is super easy to work with thanks to it's non sticky formula.

Professional use advised - be sure to follow our pro application training guides before use.

Our innovative adhesive is not a traditional messy glue, it's a clear putty that hardens under a normal UV/LED lamp OR our Pro Flash Cure lamp. Please see our application guide for full insctructions on how to use and remove.

Polyurethane Acrylate,Oligomer,Ethylene, Glycol Dimethacrylate,Hydroxycyclohexyl,Phenyl Ketone,Benzophenone Caution: Apply to nails and avoid skin. If skin around nails is inflamed or sore, do not use. In the case of a skin irritation or allergic skin reaction, cease use. Keep out of reach from children.

If you need assistance or have any questions, don't hesitate to check out our FAQ's here.

PLEASE NOTE:
When you first receive your pot of Flexi Gel adhesive, you will notice the lid is tightly screwed, with a vacuumed foil seal. It will take some effort to open, but this is to ensure the adhesive does not dry out. You must ensure the lid is tightly screwed back on after every use and does not get exposed to heat or direct sunlight.

Application Guide:
1. Prep your nails with cuticle work and before applying any product by lightly buffing the top of each nail to remove shine.
2. Apply a thin layer of clear Builder Gel polish, and cure under LED/UV lamp on the 99 second low heat setting.
3. Choose the nail tip sizes that are right for each nail.
4. Working one at a time, use the tip of a cuticle remover or nail brush or collect with the edge of the flexi tip, to take a pea size amount of the Flexi Tip Adhesive and apply it to the outlined Flexi Tip base.
5. Place tip onto natural nail ensuring there is no air bubbles. Place under LED/UV lamp on the 99 second low heat setting. Repeat step 4-5 for the next hand.
6. Apply your favourite Gel Polish and dry under a UV lamp for 30 seconds.
7. Apply your No-Wipe Top Coat and dry under a UV lamp for 30 seconds.
8. Finish off with our Cuticle oil

Caution: Professional use advised - be sure to follow our pro application training guides before use. Apply to nails and avoid skin. If skin around nails is inflamed or sore, do not use. In the case of a skin irritation or allergic skin reaction, cease use. Keep out of reach from children.